PGW 2200 & BTS 10200 Training workshops

 
 

Cisco PGW 2200 and BTS 10200 Advanced trouble shooting workshop.                    

  1. •How users work with the BTS 10200 and PGW 2200

  2. •Configuration Management

  3. •Dial-Plans and Routing
    Downloads PGW 2200 training course outline.pdfTraining_files/PGW%202200%20training%20course%20outline_V.1.0_200900304.pdfTraining_files/PGW%202200%20training%20course%20outline_V.1.0_200900304.pdfTraining_files/PGW%202200%20training%20course%20outline_V.1.0_200900304_1.pdfshapeimage_2_link_0shapeimage_2_link_1

  4. •Signaling Architecture

  5. •Redundancy and Switchover

  6. •Billing

  7. •Capacity Monitoring

  8. •Performance and Dimensioning Rules

  9. •SIP interworking with ISDN and SS7. Correct mapping of SIP headers to SS7.

  10. •Alarm Handling and Log Files

  11. •Troubleshooting

  12. •Using MGCToolkit

  13. •Using Voice Services Provisioning Tool (VSTP)

  14. •CDR configuration options.

  15. •MGCToolkit

  16. •Snooper: Advanced features of Cisco’s IP based protocol analyser

  17. •SNMP configuration and forwarding to NMS platform

  18. •Syslog forwarding to syslog server

 

Iforb offers a range of tailored VoIP training courses. All deliveries require some degree of tailoring to avoid death by power point and below is only an outline of the possibilities. Training can be delivered to individuals or small groups, at your site or remotely.

SS7 and VoIP Consultancy (C7)

Iforb has the skills and resources to deliver in-depth SS7 training, SS7 courses, SS7 tutorials, SS7 seminars and presentations.


Our SS7 consultancy and training services cover MTP, TCAP, ISUP, BICC, SCCP, CAMEL, LNP Mobile Application Part (MAP), Intelligent Networks (IN), Q.701, Q.702, Q.721, Q.722, Q.761, Q.764, Q.730, Q.711, Q.771, Q.781, Q.782, Q.784, Q.785, Q.787, Q.1901, Q.931, h.248, Q.2140, SSP, STP, SCP, M3UA, M2UA, H.323 (H323), H.245 (H245), SIP, MGCP, H.248 (H248), Megaco, SIP-T, SIPT, sigtran, ip qos, RSVP, intserv, diffserv and the DSCP.


Objectives

On completing the course, delegates will be able to:


  1. •Describe the evolution of C7.

  2. •Describe the C7 architecture, its operation and components.

  3. •Describe the different C7 link types.

  4. •Describe address translation.

  5. •Describe the ANSI and ITU-T point codes.

  6. •Describe the uses of C7 in Intelligent Networking.


Who should attend?

All telecommunications engineering staff responsible for planning, implementing, supporting or managing mobile or fixed-line telephone services.


SS7 Training Courses (C7)

Signalling System 7 (signaling system #7, signalling system #7, SS7, C7) is the main architecture used for out-of-band signalling in digital telephone networks.


This course provides a comprehensive overview of the ITU Signalling System No.7 (SS7 / C7), including the procedures for setting-up, managing and clearing down calls between users, C7 principles and higher level protocols.


The course covers current terminology, management and future applications, and is essential for delegates wanting to learn the basics of C7, its capabilities and its use.

ITP training

  1. •Introduction to SS7 over IP

  2. •SCTP

  3. •M2PA peer to peer tunneling with STP alternative

  4. •AS and ASPs

  5. •Cisco ITP-SG with the Cisco PGW 2200 Softswitch

  6. •Cisco ITP-SG Distributed Architecture

  7. •SS7 and Sigtran Open Standards M3UA Gateway for PGW 2200 and BTS 10200

  8. •SUA Gateway for IP application end nodes

  9. •M3UA and SUA features